ABB CRB 1100 Product Manual page 442

5 Repair
5.6.2 Replacing the extender unit and wrist
Continued
Disconnecting the axis-6 motor connectors
1
2
Removing the axis-6 motor
1
2
3
Continues on next page
442
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Disconnect the connectors.
• MP6
• FB6
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
CAUTION
Removing motors will release axes. This means
the axes can fall down.
Make sure axes are well supported before remov-
ing motors.
Loosen the screws and move the motor slightly
to slacken the timing belt.
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx1800002994
Note
xx1800002995
Product manual - CRB 1100
3HAC078007-001 Revision: J