ABB CRB 1100 Product Manual page 499

8
9
10
11
Reconnecting the connector J2.FB2
1
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Use a sonic tension meter to measure the timing
belt tension.
If the timing belt tension does not meet the require-
ment, loosen the motor screws and readjust.
Remove the adjustment screw from the motor.
Reconnect the connector.
• MP2
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Action
Insert the female header of the J2.FB2 connector
to the connector plate.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.7.2 Replacing the axis-2 motor
Continued
Note
Used belt: 163-174 Hz
New belt: 180-229 Hz (for reference
only)
xx1900000010
xx1800002495
Note
xx1800002491
Continues on next page
499