ABB CRB 1100 Product Manual page 408

5 Repair
5.6.1 Replacing the housing
Continued
4
5
Removing the lower arm support
1
2
Continues on next page
408
Action
Slide the connectors out of the connector plate
and disconnect the connectors.
• FB3
• MP3
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Remove the cable bracket.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the lower arm support.
Tip
If the lower arm support is hard to loosen from
the housing, use a plastic hammer to knock on
the lower arm support lightly.
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx1800003005
xx1800003006
Note
xx1800003088
Product manual - CRB 1100
3HAC078007-001 Revision: J