ABB CRB 1100 Product Manual page 217

Reconnecting the axis-4 motor connectors
1
2
Refitting the axis-3 motor
1
2
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Check the cabling status.
Make sure the cabling is in vertical state and is
not twisted.
Reconnect the connectors.
• FB4
• MP4
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Action
Check that:
• all assembly surfaces are clean and without
damages
• the motor is clean and undamaged.
Check the cooling pad.
Replace if damaged.
© Copyright 2021-2023 ABB. All rights reserved.
5.3.1 Replacing the upper cable package
Note
xx1800003618
xx1800003012
Note
Cooling pad for axis-3 and -4 mo-
tors: 3HAC071021-001
xx1800003604
Continues on next page
5 Repair
Continued
217