ABB CRB 1100 Product Manual page 338

5 Repair
5.4.2 Replacing the swing
Continued
Removing the axis-1 gearbox
1
2
3
4
Separating the swing from the lower arm
1
Continues on next page
338
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
CAUTION
Removing gearboxes will release axes. This
means the axes can fall down.
Make sure axes are well supported before remov-
ing gearboxes.
Remove the screws.
Pull out the gearbox.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx1800003073
xx1800003074
Note
Product manual - CRB 1100
3HAC078007-001 Revision: J