ABB CRB 1100 Product Manual page 230

5 Repair
5.3.1 Replacing the upper cable package
Continued
5
6
7
Continues on next page
230
Action
Refit the screws and washers.
Note
Do not tighten the screws yet.
Install the timing belt to the pulleys and verify that
the belt runs correctly in the grooves of the pul-
leys.
Install an M6x25 or longer adjustment screw to
the motor.
Note
Do not insert the entire screw to the hole.
© Copyright 2021-2023 ABB. All rights reserved.
Note
Screw: M4x16 12.9 Lafre
2C2B/FC6.9 (3 pcs)
Washer, 3HAC063985-001 (3 pcs)
xx1800002494
xx1800003028
xx1900000010
Product manual - CRB 1100
3HAC078007-001 Revision: J