ABB CRB 1100 Product Manual page 285

2
3
Putting the robot on its side
1
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Disconnect the air hoses from the Y-shaped con-
nectors.
Disconnect the connectors.
• J2.C1
• J2.C2
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Tip
The connector clip has to be pressed (1) and
pushed forward (2) to separate the J2.C2 (for
Ethernet cabling).
xx1800002943
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
xx1800002500
xx1800002501
Note
Continues on next page
285