ABB CRB 1100 Product Manual page 297

Refitting the base
Use these procedures to refit the base.
Placing the axis-1 mechanical stop
1
2
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Check the axis-1 mechanical stop.
Replace if damaged.
Put the axis-1 mechanical stop in place in the
swing.
Note
The mechanical stop can be placed in any place
except the block (A) on the swing. Make sure the
mechanical stop step pointed in the figure is fa-
cing the swing when putting.
xx1800003619
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
Mechanical stop, axis 1:
3HAC061947-001
xx1800003071
Continues on next page
297