ABB CRB 1100 Product Manual page 298

5 Repair
5.4.1 Replacing the base
Continued
Refitting the base to the swing
1
Refitting the brake release button
1
Refitting the axis-1 motor
1
Continues on next page
298
Action
Refit the base to the swing.
Note
Pay attention to the screw and washer location.
xx1800003068
Action
Refit the brake release button.
Note
Do not reconnect the connector yet.
Do not tighten the button yet.
Action
Check that:
• all assembly surfaces are clean and without
damages
• the motor is clean and undamaged.
© Copyright 2021-2023 ABB. All rights reserved.
Note
Screw: M4x16 12.9 Lafre
2C2B/FC6.9 (13 pcs)
Tightening torque: 4.4 Nm
xx1800003069
Note
brake release button assembly
tool, included in the special toolkit
3HAC071022-001
xx1800003040
Note
Product manual - CRB 1100
3HAC078007-001 Revision: J