ABB CRB 1100 Product Manual page 342

5 Repair
5.4.2 Replacing the swing
Continued
2
Refitting the base to the swing
1
Continues on next page
342
Action
Put the axis-1 mechanical stop in place in the
swing.
Note
The mechanical stop can be placed in any place
except the block (A) on the swing. Make sure the
mechanical stop step pointed in the figure is fa-
cing the swing when putting.
xx1800003619
Action
Refit the base to the swing.
Note
Pay attention to the screw and washer location.
xx1800003068
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx1800003071
Note
Screw: M4x16 12.9 Lafre
2C2B/FC6.9 (13 pcs)
Tightening torque: 4.4 Nm
xx1800003069
Product manual - CRB 1100
3HAC078007-001 Revision: J