ABB CRB 1100 Product Manual page 343

Refitting the brake release button
1
Refitting the axis-1 motor
1
2
3
Product manual - CRB 1100
3HAC078007-001 Revision: J
Action
Refit the brake release button.
Note
Do not reconnect the connector yet.
Do not tighten the button yet.
Action
Check that:
• all assembly surfaces are clean and without
damages
• the motor is clean and undamaged.
Check the cooling pad.
Replace if damaged.
Install the timing belt to the motor pulley and
verify that the belt runs correctly in the groove of
the pulley.
© Copyright 2021-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
brake release button assembly
tool, included in the special toolkit
3HAC071022-001
xx1800003040
Note
Cooling pad for axis-1 and -2 mo-
tors: 3HAC071020-001
xx1800003602
xx1800003085
Continues on next page
343