ABB CRB 1100 Product Manual page 498

5 Repair
5.7.2 Replacing the axis-2 motor
Continued
5
6
7
Continues on next page
498
Action
Install an M6x25 or longer adjustment screw to
the motor.
Note
Do not insert the entire screw to the hole.
Use a handheld dynamometer hooking to the
screw and pull the dynamometer to reach the ini-
tial referenced force.
Secure the motor with the screws.
© Copyright 2021-2023 ABB. All rights reserved.
Note
xx1900000010
Initial referenced force for used
belt: 68.18-75.04 N (for reference
only)
Initial referenced force for new belt:
97.4-107.2 N
xx1900000029
Tightening torque: 3.5 Nm
xx1800002493
Product manual - CRB 1100
3HAC078007-001 Revision: J