Siemens SINUMERIK 840Di Diagnostic Manual page 840

List of Action Numbers
No. 45
Explanation Activate the program which is still external (PI command)
Cause -
Remedy -
No. 46
Explanation Program selection from another channel (channel communication, NC block: INIT).
Cause -
Remedy -
No. 47
Explanation Save definition of an ASUB, which can be activated (PI command)
Cause -
Remedy -
No. 48
Explanation Sets all machine data with the attribute (NEW_CONF) to active (PI command)
Cause -
Remedy -
No. 49
Explanation Clear all alarms with the clear condition CANCELCLEAR (PI command, Acknowledge
Alarm key).
Cause -
Remedy -
No. 50
Explanation Continue block search (NC block, Stopre)
Cause -
Remedy -
3-840
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
11/2006