Siemens SINUMERIK 840Di Diagnostic Manual page 647

11/2006
104248 Error on reading monitoring data
Definitions: --
Remedy: --
104249 Error on writing monitoring data
Definitions: --
Remedy: --
104250 Location not empty or not available
Definitions: --
Remedy: --
104251 Only one magazine available !
Definitions: --
Remedy: --
104252 Only 0 or 1 allowed for tool life/quantity monitoring !
Definitions: --
Remedy: --
104253 Only tool life or quantity monitoring possible
Definitions: --
Remedy: --
104254 Illegal magazine or location number
Definitions: --
Remedy: --
104255 Function Current location not valid for buffer
Definitions: --
Remedy: --
105000 Error %1 ! %2
Parameters: %1 = --
%2 = --
Definitions: System-internal error.
A memory-access has failed - should not occur in normal operation.
Remedy: --
105001 Cycles description '%1' not available
Parameters: %1 = --
Definitions: The cycle description sc.com was not found in the NCK file system.
Remedy: --
105002 File %1 exists already !
Parameters: %1 = --
Definitions: The file name entered is already in this directory.
Remedy: --
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
Overview of Alarms
HMI alarms
2-647