Siemens SINUMERIK 840Di Diagnostic Manual page 5

11/2006
Questions about the manual
If you have any queries (suggestions, corrections) in relation to this documenta-
tion, please send a fax or email to the following address:
Fax: +49 (0) 9131 / 98 - 63315
Email: mailto:docu.motioncontrol@siemens.com
Fax form: See the reply form at the end of the document.
SINUMERIK Internet address
http://www.siemens.com/motioncontrol
EU Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found/obtained
on the Internet:
http://www.ad.siemens.com/csinfo
under the Product/Order No. 15257461
at the relevant branch office of the A&D MC group of Siemens AG
Subject matter of this manual
This manual is intended as a work of reference. It allows the operator at the
machine tool:
− To correctly assess special situations when operating the machine.
− To ascertain the reaction of the system to the special situation.
− To utilize the possibilities for continued operation following the special sit-
uation.
− To follow references to other documentation containing further details.
Scope
This manual describes the alarms/messages from the NC kernel (NCK) area, the
PLC and the SIMODRIVE 611D drives.
Other alarms can occur from the HMI/MMC (Human-Machine/Man-Machine
Communication) areas. These alarms are displayed on the operator panel in the
form of self-explanatory text.
For special situations in conjunction with the integrated PLC, please refer to the
SIMATIC S7-300 documentation.
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
Preface
v