Siemens SINUMERIK 840Di Diagnostic Manual page 309

11/2006
16830 Channel %1 block %2 incorrect position programmed for axis/spindle %3
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
Definitions: A position beyond the range of 0 - 359.999 has been programmed for a modulo axis.
Reaction: Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy: Program position in the range 0 - 359.999.
Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
16903 Channel %1 program control: action %2<ALNX> not allowed in the
current state
Parameters: %1 = Channel number
%2 = Action number/action name
Definitions: The relevant action cannot be processed now. This can occur, for instance, during read-in of machine
data.
Reaction: Alarm display.
Remedy: Wait until the procedure is terminated or abort with Reset and repeat the operation.
Program Clear alarm with the Delete key or NC START.
Continuation:
16904 Channel %1 program control: action %2<ALNX> not allowed in the
current state
Parameters: %1 = Channel number
%2 = Action number/action name
Definitions: The operation (program, JOG, block search, reference point, etc.) cannot be started or continued in
the current status.
Reaction: Alarm display.
Remedy: Check the program status and channel status.
Program Clear alarm with the Delete key or NC START.
Continuation:
16905 Channel %1 program control: action %2<ALNX> not allowed
Parameters: %1 = Channel number
%2 = Action number/action name
Definitions: Operation cannot be started or continued. A start is only accepted when an NCK function can be
started.
Example: A start is accepted in JOG mode when, for example, the function generator is active or a
JOG movement has first been stopped with the Stop key.
Reaction: Alarm reaction in Automatic mode.
Remedy: Check the program status and channel status.
Program Clear alarm with the Delete key or NC START.
Continuation:
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
Overview of Alarms
NCK alarms
2-309