Siemens SINUMERIK 840Di Diagnostic Manual page 354

Overview of Alarms
NCK alarms
18204 Channel %1 block %2 curve table: instruction SUPA not within CTABDEF
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: G code SUPA is not allowed for the definition of a curve table, as it triggers a preprocessing stop.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: Remove G code SUPA from the curve table definition. If possible, use G codes G53 or G153 instead
of SUPA.
Program Clear alarm with the RESET key. Restart part program
Continuation:
18300 Channel %1 block %2 frame: fine shift not possible
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Allocation of a fine shift to settable frames or the basic frame is not possible since MD
$MN_FRAME_FINE_TRANS is not equal to 1.
Reaction: Interpreter stop
Interface signals are set.
Alarm display.
Remedy: Please inform the authorized personnel/service department. Modify program or set MD
$MN_FRAME_FINE_TRANS to 1.
Program Clear alarm with NC START or RESET key and continue the program.
Continuation:
18310 Channel %1 block %2 frame: illegal rotation
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Rotations are not possible with NCU global frames.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Modify part program.
Program Clear alarm with the RESET key. Restart part program
Continuation:
18311 Channel %1 block %2 frame: illegal instruction
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: An attempt was made to read or write a frame which does not exist.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy: Modify part program.
Program Clear alarm with the RESET key. Restart part program
Continuation:
2-354
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
11/2006