Siemens SINUMERIK 840Di Diagnostic Manual page 83

11/2006
6581 NC user memory full
Definitions: The DRAM file system of the user area is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6582 NC machine OEM memory full
Definitions: The DRAM file system of the machine OEM area is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6583 NC system memory full
Definitions: The DRAM file system of the system area (Siemens) is full. The order cannot be executed.
Reaction: Alarm display.
Remedy: Delete or unload files (e.g. parts programs)
Program Clear alarm with the Delete key or NC START.
Continuation:
6584 NC memory limit TMP reached
Definitions: The DRAM file system of the TMP (temporary) area is full. The job cannot be executed.
Reaction: Alarm display.
Remedy: Increase machine date $MD_MM_DRAM_FILE_MEM_SIZE or switch off the precompilation of
individual or all cycles or, if need be,
delete the files in the TMP area.
Program Clear alarm with the Delete key or NC START.
Continuation:
6585 NC external memory limit reached
Definitions: The DRAM file system of the external area (execution of the external drive) is full.
The job cannot be executed.
Reaction: Alarm display.
Remedy: Load the files to be executed explicitly into the NCK.
Program Clear alarm with the Delete key or NC START.
Continuation:
6600 NC card memory is full
Definitions: The NC card file system of the NCK is full. No more data can be stored on the NC card.
Reaction: Alarm display.
Remedy: Delete the data on the PCMCIA card.
Program Clear alarm with the Delete key or NC START.
Continuation:
6610 Too many files open on NC card
Definitions: Too many files are being accessed simultaneously on the NC card.
Reaction: Alarm display.
Remedy: Repeat the action later.
Program Clear alarm with the Delete key or NC START.
Continuation:
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
Overview of Alarms
NCK alarms
2-83