Siemens SINUMERIK 840Di Diagnostic Manual page 3

Preface
Structure of the documentation
The SINUMERIK documentation is organized in 3 parts:
• General Documentation
• User Documentation
• Manufacturer/Service Documentation
An overview of publications, which is updated monthly and also provides informa-
tion about the language versions available, can be found on the Internet at:
http://www.siemens.com/motioncontrol
Select "Support" -> "Technical Documentation" -> "Overview of Publications"
The Internet version of the DOConCD (DOConWEB) is available at:
http://www.automation.siemens.com/doconweb
Information about training courses and FAQs (Frequently Asked Questions) can
be found in internet under:
http://www.siemens.com/motioncontrol under menu option "Support".
Target group
This publication is intended for project engineers, commissioners, machine oper-
ators and service and maintenance personnel.
Benefits
The diagnostics manual enables the intended target group to evaluate error and
fault indications and to respond accordingly.
With the help of the diagnostics manual, the target group has an overview of the
various diagnostic options and diagnostic tools.
Standard scope
This Diagnostics Manual describes only the functionality of the standard version.
Additions or revisions made by the machine manufacturer are documented by the
machine manufacturer.
Other functions not described in this documentation might be executable in the
control. However, no claim can be made regarding the availability of these func-
tions when the equipment is first supplied or in the event of servicing.
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
iii