Mounting Types - Siemens SCALANCE XCM-100 Equipment Manual

Installation and disassembly
5.2 Mounting types
5.2

Mounting types

The following mounting types are provided for the SCALANCE XCM-100:
• DIN rail
• S7-300 mounting rail
• S7-1500 mounting rail
• Wall mounting
Installation clearance
Observe the following minimum clearances so that the convection ventilation of the device is
not blocked:
• Below at least 10 cm
• Above at least 10 cm
Installation position
The following installation position is recommended:
Horizontal
Horizontal installation of the rack (DIN rail)
A reduced maximum temperature may apply in the event of a different installation position;
see section "Technical specifications of SCALANCE XCM102 (Page 55)"
32
SCALANCE XCM-100 Media Converter
Equipment Manual, 12/2023, C79000-G8976-C659-03