Using Gui (Eb500 With Front Control Panel Or Remote Access Gui) - R&S EB500 Getting Started

®
R&S EB500
4.5.2 Using GUI (EB500 with front control panel or Remote
Access GUI)
The IP address of the R&S EB500 is needed during the GUI Installation for Remote
Access. This can be obtained from the front panel of the EB500 with front control
panel with the key sequence SETUP -> "Config" -> "Network". Refer to the Oper-
ating Manual for more details.
Getting Started 4072.8432.02 ─ 04
Software and Firmware Update
Changing the IP Address
70