Toyota Camry Manual page 2699

RS–32
SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
10 m (33 ft) or more
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
HINT:
Battery
Have a battery ready as the power source to deploy the airbag.
(a) Check functioning of the SST. (See page RS–18)
SST
AB0158
(b) Disconnect the airbag connector.
(1)
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(2)
(3)
H03287
(c) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H08317
(2)
(3)
NOTICE:
Take care not to damage the SST wire harness.
(4)
R13455
(d) Deploy the airbag.
(1)
(2)
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
H03286
– FRONT PASSENGER AIRBAG ASSEMBLY
09082–00700
Remove the lower instrument cover inside the No.2
under cover.
Pull up the connector.
Disconnect the airbag connector.
Connect the connector of 2 SST to the front passen-
ger airbag assembly connector.
09082–00700, 09082–00760
Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
Close all the doors and windows of the vehicle.
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (–) termi-
nal.
Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
Press the SST activation switch and deploy the air-
bag.
Author : Date :
2177