Toyota Camry Manual page 2816

SR–34
SST
STEERING – POWER STEERING GEAR
REMOVAL
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING WHEEL PAD
(See page SR–11)
3. REMOVE STEERING WHEEL
(See page SR–11)
4. DISCONNECT RH AND LH TIE ROD ENDS
(See page SA–10)
5. DISCONNECT INTERMEDIATE SHAFT ASSEMBLY
(See page SR–11)
6. DISCONNECT CLAMP PLATE
Remove the nut.
7. DISCONNECT PRESSURE FEED AND RETURN
TUBES
Using SST, disconnect the tube.
SST 09631–22020
8. DISCONNECT STABILIZER BAR
Remove the 4 bolts.
HINT:
Do not remove the bar.
9. REMOVE NO.1 FUEL TUBE PROTECTOR
W04222
Remove the 2 bolts and nut.
10. REMOVE PS GEAR ASSEMBLY
(a) Remove the 2 gear assembly set bolts and nuts.
HINT:
Lift up the stabilizer bar and remove the bolts.
(b) Remove the gear assembly from the LH of the vehicle.
NOTICE:
Do not damage the turn pressure tubes.
Author : Date :
SR06U–01
2129