Toyota Camry Manual page 2773

STARTING (1MZ–FE)
REPLACEMENT
1.
(a)
B01224
B01225
B01226
Stop Collar
Pinion Gear
Compression
Spring
B01227
B01228
– STARTER
REPLACE CLUTCH ASSEMBLY
Disassemble the starter housing and the clutch assembly.
(1) Mount a brass bar in a vise, and install the starter
housing and clutch assembly to the brass bar.
(2) Push down the pinion gear.
(3) Using a plastic–faced hammer, tap down the stop
collar.
(4) Using a screwdriver, pry out the snap ring.
(5) Remove these parts:
z
Stop collar
z
Pinion gear
z
Compression spring
(6) Push down the starter housing, and remove the
spring retainer.
(7) Disassemble these parts:
z
Starter housing
z
Starter clutch
z
Compression spring
z
Clutch shaft
Author :
ST–11
ST01Y–03
Date :
1738