Toyota Camry Manual page 2780

ST–18
Terminal 50
Disconnect
Disconnect
Terminal 30
Terminal 50
STARTING (1MZ–FE)
TEST
NOTICE:
Terminal C
These tests must be done within 3 to 5 seconds to avoid
burning out the coil.
1.
(a)
(b)
Battery
B01242
2.
With battery connected as above with the clutch pinion gear
Terminal C
out, disconnect the negative (–) lead from terminal C. Check
that the pinion gear remains out.
Battery
B01243
3.
(a)
(b)
Battery
B01244
4.
(a)
(b)
Battery
Ammeter
B01245
– STARTER
DO PULL–IN TEST
Disconnect the field coil lead wire from terminal C.
Connect the battery to the magnetic switch as shown.
Check that the clutch pinion gear moves outward.
DO HOLD–IN TEST
INSPECT CLUTCH PINION GEAR RETURN
Disconnect the negative (–) lead from the switch body.
Check that the clutch pinion gear returns inward.
DO NO–LOAD PERFORMANCE TEST
Connect the battery and ammeter to the starter as shown.
Check that the starter rotates smoothly and steadily with
the pinion gear moving out. Check that the ammeter
shows the specified current.
Specified current: 90 A or less at 11.5 V
Author :
ST020–01
Date :
1745