Toyota Camry Manual page 2810

SR–28
5S–FE Engine :
Pressure Feed Tube
Stopper
1MZ–FE Engine :
Stopper
Example 5S–FE Engine :
A
5S–FE Engine :
Fulcrum
Length
STEERING
INSTALLATION
1.
(a)
HINT:
Make sure the stopper of the tube is touching the front bracket,
as shown, then torque the union bolt.
(b)
Pressure
Feed
Tube
W03361
2.
Temporarily tighten the 2 (A and B) bolts.
3.
(a)
B
W03360
(b)
SST
HINT:
Use a torque wrench with a fulcrum length of 300 mm (11.81
in.).
W03542
– POWER STEERING VANE PUMP
INSTALL PRESSURE FEED TUBE
Torque the union bolt with a new gasket.
5S–FE and 1MZ–FE Engines:
Torque: 52 N·m (525 kgf·cm, 38 ft·lbf)
Install the oil pressure switch to the union bolt.
5S–FE and 1MZ–FE Engines:
Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)
INSTALL PS VANE PUMP ASSEMBLY WITH PRESS-
ER FEED TUBE
INSTALL DRIVE BELT
Adjust drive belt tension.
(See page SR–3)
5S–FE Engine:
Using SST, torque the A bolt.
SST 09249–63010
Torque: 29 N·m (293 kgf·cm, 21 ft·lbf)
Author :
SR06S–01
Date :
2123