Toyota Camry Manual page 2877

SUSPENSION AND AXLE –
INSPECTION
INSPECT BALL JOINT FOR ROTATION CONDITION
(a) As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously one turn
each 2 – 4 seconds and take the torque reading on the 5th
turn.
Turning torque:
1.0 – 3.4 N·m (10 – 35 kgf·cm, 8.7 – 30 in.·lbf)
N00208
FRONT LOWER BALL JOINT
Author :
SA–45
SA07Z–01
Date :
1996