Toyota Camry Manual page 2817

SST
SST
Matchmarks
STEERING
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
Using SST, secure the gear assembly in a vise.
W04228
2.
(a)
(b)
W04229
3.
(a)
(b)
R00429
4.
Using a screwdriver, loosen the clamp.
NOTICE:
L
L
W04230
5.
Claw Washer
(a)
NOTICE:
Avoid any impact to the steering rack.
R11644
– POWER STEERING GEAR
SECURE PS GEAR ASSEMBLY IN VISE
SST 09612–00012
REMOVE 2 TURN PRESSURE TUBES
Using SST, remove the tube.
SST 09633–00020
Remove the 2 O–rings from the tube.
REMOVE RH AND LH TIE ROD ENDS AND LOCK
NUTS
Place matchmarks on the tie rod end and rack end.
Loosen the lock nut.
REMOVE RH AND LH CLIPS, RACK BOOTS AND
CLAMPS
Be careful not to damage the boot.
Mark the RH and LH boots.
REMOVE RH AND LH RACK ENDS AND CLAW WASH-
ERS
Using a screwdriver and hammer, stake back the washer.
Author :
SR–35
SR06V–01
Date :
2130