Toyota Camry Manual page 2825

Press
SST
SST
Oil Seal
Rack Teeth End
Vinyl Tape
STEERING –
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. COAT WITH POWER STEERING FLUID OR MOLYBDE-
NUM DISULFIDE LITHIUM BASE GREASE
(See pages SR–31)
2. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) Using SST, press in the oil seal.
SST
NOTICE:
L
Make sure to install the oil seal facing the correct
direction.
L
Take care that the oil seal does not get reversed as
you install it.
W03561
3. INSTALL STEERING RACK
(a) Install SST to the rack.
SST
HINT:
If necessary, scrape the burrs off the rack teeth end and bur-
nish.
(b) Coat the SST with power steering fluid.
(c) Install the rack into the rack housing.
NOTICE:
Be careful not to damage the oil seal lip.
(d) Remove SST.
SST
W02101
4. INSTALL BUSHING
(a) Coat a new O–ring with power steering fluid and install it
to the bushing.
(b) To prevent oil seal lip damage, wind vinyl tape on the
steering rack end, and apply power steering fluid.
(c) Install the bushing.
NOTICE:
L
Make sure to install the bushing facing the correct
direction.
R11574
L
Be careful not to damage the oil seal lip.
POWER STEERING GEAR
09950–60010 (09951–00240, 09951–00430,
09952–06010), 09950–70010 (09951–07360)
09631–33010
Author :
SR–43
SR06X–01
Date :
2138