Toyota Camry Manual page 2863

Clearance
A
SUSPENSION AND AXLE
(e)
(f)
(g)
NOTICE:
Do not overtighten the SST.
SST
R10353
(h)
9.
SST
B C
F02023
– FRONT DRIVE SHAFT (1MZ–FE)
Secure the preplaced 3 clamps onto the boots.
Place SST onto the clamp.
SST 09521–24010
Tighten the SST so that the clamp is pinched.
Using SST, adjust the clearance of the clamp.
SST 09240–00020
Clearance:
A : 1.9 mm (0.075 in.) or less
B : 1.5 – 2.5 mm (0.059 – 0.098 in.)
C : 3.0 – 4.0 mm (0.118 – 0.157 in.)
CHECK DRIVE SHAFT (See page SA–27)
Author :
SA–31
Date :
1982