SUPPLEMENTAL RESTRAINT SYSTEM
H01346
H01339
–
SIDE AIRBAG SENSOR ASSEMBLY
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
electrical devices unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
1.
REMOVE FRONT DOOR SCUFF PLATE
2.
REMOVE CENTER PILLAR LOWER GARNISH
3.
REMOVE FRONT SEAT OUTER BELT RETRACTOR
(See page BO–126)
(a)
Disconnect the pretensioner connector.
(b)
Remove the 2 bolts and retractor.
4.
REMOVE SIDE AIRBAG SENSOR ASSEMBLY
(a)
Disconnect the side airbag sensor assembly connector.
NOTICE:
Disconnect the connector with the sensor assembly
installed.
(b)
Using a torx wrench, remove the 3 screws and side airbag
sensor assembly.
Torx wrench: T40 (Part No.09042–00020 or locally
manufactured tool)
Author :
RS–69
RS01R–05
Date :
2214