Toyota Camry Manual page 2845

SUSPENSION AND AXLE
SST
SST
SST
SST
SST
– FRONT AXLE HUB
REASSEMBLY
1. INSTALL BEARING
(a) Using SST and a press, install a new bearing to the steer-
ing knuckle.
SST 09608–32010
(b) Using snap ring pliers, install a new snap ring.
2. INSTALL DUST COVER
Place the dust cover and using a torx wrench (T30), torque the
4 bolts.
R00792
Torque: 8.3 N·m (85 kgf·cm, 74 in.·lbf)
3. INSTALL FRONT AXLE HUB
Using SST and a press, install the axle hub.
SST 09310–35010, 09608–32010
4. INSTALL LOWER BALL JOINT
(a) Install the lower ball joint and torque the nut.
Torque: 123 N·m (1,250 kgf·cm, 90 ft·lbf)
(b) Install a new cotter pin.
R08860
5. INSTALL DUST DEFLECTOR
Using SST and a hammer, install a new dust deflector.
SST 09316–60011 (09316–00011, 09316–00041),
09608–32010
HINT:
Align the holes for the ABS speed sensor in the dust deflector
and steering knuckle.
Z19236
Author : Date :
SA–13
SA07E–01
1964