Toyota Camry Manual page 2881

SUSPENSION AND AXLE –
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA-
TION CONDITION
(a) As shown in the illustration, flip the ball joint stud back and
forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously one turn
each 2 – 4 seconds and take the torque reading on the 5th
turn.
Turning torque:
Z00340
0.05 – 1.0 N·m (0.5 – 10 kgf·cm, 0.4 – 8.7 in.·lbf)
FRONT STABILIZER BAR
Author :
SA–49
SA083–01
Date :
2000