Toyota Camry Manual page 2731

RS–64
SUPPLEMENTAL RESTRAINT SYSTEM – FRONT AIRBAG SENSOR
REMOVAL
NOTICE:
F
If the wiring connector of the SRS is disconnected
with the ignition switch at ON or ACC position, DTCs
will be recorded.
F
Never use SRS parts from another vehicle. When re-
placing parts, replace them with new parts.
F
Never reuse the sensor involved in a collision when
the SRS has deployed.
F
Never repair a sensor in order to reuse it.
1. REMOVE HEAD LIGHT LH AND RH
(a) Remove the 2 clips and turn signal lights.
(b) Remove the 4 bolts and head lights.
2. LH:
REMOVE FRONT AIRBAG SENSOR
(a) Disconnect the connector.
NOTICE:
Disconnect the connector with sensor assembly installed.
(b) Remove the 2 bolts and front airbag sensor LH.
H08318
3. RH:
REMOVE FRONT AIRBAG SENSOR
(a) Disconnect the connector.
NOTICE:
Disconnect the connector with sensor assembly installed.
(b) Remove the 2 bolts and front airbag sensor RH.
H08319
Author : Date :
RS0F0–01
2209