Toyota Camry Manual page 2734

SUPPLEMENTAL RESTRAINT SYSTEM
LH:
RH:
– FRONT AIRBAG SENSOR
INSTALLATION
1. INSTALL FRONT AIRBAG SENSOR LH AND RH
(a) Install the front airbag sensor with the arrow on the sensor
facing toward the front of the vehicle.
Torque: 20 N·m (205 kgf·cm, 15 ft·lbf)
NOTICE:
F
Connection of the connector is done after the sensor
assembly has been installed.
F
Make sure the sensor is installed with the specified
torque.
F
If the sensor has been dropped, or there are cracks,
dents or other defects in the case, brackets or con-
nector, replace the removed sensor with a new one.
F
The front sensor is equipped with an electrical con-
nection check mechanism. Be sure to lock this mech-
anism securely when connecting the connector. If the
connector is not securely locked, a malfunction code
will be detected by the diagnostic system.
H06728 (b) Connect the front airbag sensor connector.
2. INSTALL HEAD LIGHT LH AND RH
(See page BE–28)
3. INSTALL TURN SIGNAL LIGHT LH AND RH
Author : Date :
RS–67
RS01P–14
2212