SUPPLEMENTAL RESTRAINT SYSTEM
Width
Inner
Diam.
SST
(1)
H01333
(2)
H01334
(3)
Tire size : Must exceed the following dimensions:–
Width 185 mm (7.28 in.)
Inner diameter 360 mm (14.17 in.)
CAUTION:
F
Make sure the wire harness is tight. It is very danger-
ous when a loose wire harness results in the side air-
bag assembly coming free due to the shock from the
H08326
airbag deploying.
F
Always tie down the side airbag assembly with the
airbag door facing inside.
NOTICE:
The tire will be marked by the airbag deployment, so when
disposing of the airbag use a redundant tire.
(d)
Check functioning of the SST. (See page RS–18)
SST
Battery
AB0158
–
SIDE AIRBAG ASSEMBLY (TMC Made)
Install the 2 nuts to the side airbag assembly.
Wind the wire harness around the stud bolts of the
side airbag assembly as shown in the illustration.
Position the side airbag assembly inside the tire
with the airbag deployment direction facing inside.
09082–00700
Author :
RS–45
Date :
2190