Tire And Wheel - Toyota Camry Manual

SA–2
Front
SUSPENSION AND AXLE –

TIRE AND WHEEL

INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.
Cold inflation pressure:
Normal driving
R03031
P195/70R14 90S, 90H
1
* : For all loads including full rated loads
2
* : For reduced loads (1 to 4 passengers)
Trailer towing
1
* : For driving under 160 km/h (100 mph)
2
* : For driving at 160 km/h (100 mph) or over
(b) Check the tire runout.
Tire runout: 1.0 mm (0.039 in.) or less
2. ROTATING TIRES
HINT:
See the illustration for where to rotate each tire.
R15157
3. INSPECT WHEEL BALANCE
(a) Check and adjust the Off–the–car balance.
(b) If necessary, check and adjust the On–the–car balance.
Imbalance after adjustment:
8.0 g (0.018 lb) or less
R07928
TIRE AND WHEEL
Tire size
P205/65R15 92H
Tire size
P195/70R14 90S
P205/65R15 92H
Author :
SA078–01
Front, Rear
2
kPa (kgf/cm or bar, psi)
210 (2.1, 30)
1
* 220 (2.2, 32)
2
* 200 (2.0, 29)
Front, Rear
2
kPa (kgf/cm or bar, psi)
1
* 210 (2.1, 30)
2
* 240 (2.4, 36)
1
* 220 (2.2, 32)
2
* 240 (2.4, 36)
Date :
1953