Toyota Camry Manual page 2899

A B
SUSPENSION AND AXLE –
REASSEMBLY
ASSEMBLE NO.2 LOWER SUSPENSION ARM
(a) Install the 2 lock nuts to the No.2 lower suspension arm.
(b) Turn the adjusting tube and assemble the No.2 lower sus-
pension arm.
W03222
HINT:
When assembling the No.2 lower suspension arm, make sure
that the length of A and B shown in the illustration is the same.
Maximum difference: 3.0 mm (0.118 in.)
W03223
(c) Adjust the No.2 lower suspension arm length by turning
the adjusting tube.
Arm length: 512.3 mm (20.169 in.)
(d) Temporarily tighten the 2 lock nuts.
HINT:
After adjusting the rear wheel alignment, torque the lock nuts
(See page SA–7).
Torque: 56 N·m (570 kgf·cm, 41 ft·lbf)
W03224
REAR LOWER SUSPENSION ARM AND STRUT ROD
Author :
SA–67
SA08J–01
Date :
2018