Toyota Camry Manual page 2809

Example 5S–FE Engine :
SST
STEERING – POWER STEERING VANE PUMP
11. INSTALL SPRING, FLOW CONTROL VALVE AND
PRESSURE PORT UNION
(a) Install the valve facing the correct direction.
(See page SR–18)
(b) Coat a new O–ring with power steering fluid and install it
to the union.
(c) Torque the union.
5S–FE and 1MZ–FE Engines:
Torque: 83 N·m (850 kgf·cm, 62 ft·lbf)
12. INSTALL SUCTION PORT UNION
(a) Coat a new O–ring with power steering fluid and install it
to the union.
(b) Torque the bolt.
5S–FE and 1MZ–FE Engines:
Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)
13. INSTALL FRONT AND REAR BRACKETS
Torque the 3 bolts and 2 nuts.
5S–FE and 1MZ–FE Engines:
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
14. INSTALL VANE PUMP PULLEY
Using SST to stop the pulley rotating, torque the nut.
SST 09960–10010 (09962–01000, 09963–01000)
5S–FE and 1MZ–FE Engines:
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
15. MEASURE PS VANE PUMP ROTATING TORQUE
(See page SR–22)
W03339
Author : Date :
SR–27
2122