Toyota Camry Manual page 2659

SST
Ohmmeter
SFI (1MZ–FE)
INSPECTION
1.
2.
3.
4.
(a)
Knock Sensor 1
(b)
Knock Sensor 2
P20115
5.
Using an ohmmeter, check that there is no continuity between
No Continuity
the terminal and body.
If there is continuity, replace the sensor.
6.
(a)
(b)
P01630
7.
8.
9.
– KNOCK SENSOR
REMOVE AIR CLEANER HOSE
REMOVE RH ENGINE MOUNTING STAY
REMOVE INTAKE MANIFOLD ASSEMBLY AND
WATER OUTLET (Seepage EM–32)
REMOVE KNOCK SENSORS
Disconnect the knock sensor connector.
Using SST, remove the knock sensor.
SST 09817–16011
INSPECT KNOCK SENSORS
REINSTALL KNOCK SENSORS
Using SST, install the knock sensor.
SST 09817–16011
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
Connect the knock sensor connector.
REINSTALL WATER OUTLET AND INTAKE
MANIFOLD ASSEMBLY (See page EM–57)
REINSTALL RH ENGINE MOUNTING STAY
REINSTALL AIR CLEANER HOSE
Author :
SF–67
SF08L–03
Date :
1566