Toyota Camry Manual page 2811

1MZ–FE Engine :
Fulcrum
Length
SST
5S–FE Engine :
SST
1MZ–FE Engine :
Pressure
Feed Tube
Fulcrum
Length
STEERING
(c)
HINT:
L
L
Clamp
(d)
Engine Wire
(e)
NOTICE:
Be careful for oil on the connector.
W03543
4.
(a)
HINT:
Fulcrum
L
Length
L
(b)
SST
(c)
(d)
(e)
W04221
(f)
(g)
(h)
5.
– POWER STEERING VANE PUMP
1MZ–FE Engine:
Using SST, torque the A bolt.
SST 09249–63010
Torque: 29 N·m (293 kgf·cm, 21 ft·lbf)
Use a torque wrench with a fulcrum length of 300 mm
(11.81 in.).
Disconnect the clamp with engine wire.
Torque the B bolt.
5S–FE and 1MZ–FE Engines:
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
Connect the connector to the oil pressure switch.
CONNECT PRESSURE FEED TUBE
Using SST, connect the tube.
SST 09631–22020
5S–FE Engine:
Torque: 32 N·m (326 kgf·cm, 24 ft·lbf)
1MZ–FE Engine:
Torque: 20 N·m (203 kgf·cm, 15 ft·lbf)
Use a torque wrench with a fulcrum length of 300 mm
(11.81 in.).
This torque value is effective in case that SST is parallel
to a torque wrench.
5S–FE Engine:
Install the clamp to the tube.
5S–FE Engine:
Install the 2 clamp plates and 2 holders to the tube.
5S–FE Engine:
Install the clamp plate set bolt.
5S–FE Engine:
Install the clamp plate set nut.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
1MZ–FE Engine:
Install the 2 clamp plates and 2 holders to the tube.
1MZ–FE Engine:
Tighten the bolt.
1MZ–FE Engine:
Install the 2 clamp plate set nuts.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
CONNECT RETURN HOSE
Author :
SR–29
Date :
2124