Toyota Camry Manual page 2654

SF–62
Ohmmeter
Ohmmeter
Air
G
Battery
SFI (1MZ–FE)
INSPECTION
1.
2.
Using an ohmmeter, check that there is continuity between the
Continuity
terminals.
If there is no continuity, replace the VSV.
B01273
3.
Using an ohmmeter, check that there is no continuity between
No Continuity
each terminal and the body.
If there is continuity, replace the VSV.
B00798
4.
(a)
E
B00799
(b)
Air
(c)
If operation is not as specified, replace the VSV.
5.
F
E
B00800
– VSV FOR VAPOR PRESSURE SENSOR
REMOVE VSV
INSPECT VSV FOR OPEN CIRCUIT
Resistance: 33 – 39 Ω at 20°C (68°F)
INSPECT VSV FOR GROUND
INSPECT VSV OPERATION
Check that air flows from ports E to G.
Apply battery positive voltage across the terminals.
Check that air flows from ports E to F.
REINSTALL VSV
Author :
SF08H–03
Date :
1561