Toyota Camry Manual page 2686

SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
SST
SST
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
Battery
HINT:
Have a battery ready as the power source to deploy the airbag.
AB0158
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the supplemental restraint system.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
H01580
(b) Install the SST.
CAUTION:
Check that there is no looseness in the steering wheel and
steering wheel pad.
(1)
(2)
W03515
– STEERING WHEEL PAD AND SPIRAL CABLE
09082–00700
Connect the SST to the battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (–) terminal.
Check functioning of the SST.
Press the SST activation switch, and check that the
LED of the SST activation switch lights up.
Remove the steering column lower cover.
Remove the 3 screws and steering column lower
cover as shown in the illustration.
Disconnect the airbag connector of the spiral cable.
Author :
RS–19
Date :
2164