Toyota Camry Manual page 2870

SA–38
SST
SUSPENSION AND AXLE
REASSEMBLY
1.
2.
3.
(a)
NOTICE:
Do not use an impact wrench. It will damage the SST.
W03200
HINT:
Use 2 of the same type of SST.
(b)
HINT:
Fit the lower end of the coil spring into the gap of the spring low-
er seat.
4.
(a)
(b)
W03201
(c)
(d)
SST
(e)
NOTICE:
Check that the bearing fits into the recess in the suspen-
sion support.
W03199
– FRONT SHOCK ABSORBER
INSTALL LOWER INSULATOR ONTO SHOCK AB-
SORBER
INSTALL SPRING BUMPER TO PISTON ROD
INSTALL COIL SPRING
Using SST, compress the coil spring.
SST 09727–30021
Install the coil spring to the shock absorber.
INSTALL SPRING UPPER SEAT AND INSULATOR
Align the 'OUT' mark of spring upper seat with the mark
of the upper insulator.
Install the spring upper seat with upper insulator to the
shock absorber with the mark facing the outside of the ve-
hicle.
Install the bearing and suspension support.
Using SST to hold the suspension support, install a new
nut.
SST 09729–22031
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
Remove the SST from the coil spring.
SST 09727–30021
Author :
SA07R–01
Date :
1989