Toyota Camry Manual page 2893

I
SUSPENSION AND AXLE
REASSEMBLY
1. INSTALL LOWER INSULATOR
2. INSTALL SPRING BUMPER TO PISTON ROD
3. INSTALL COIL SPRING
(a) Using SST, compress the coil spring.
SST
SST
NOTICE:
Do not use an impact wrench. It will damage the SST.
R00911
(b) Install the coil spring to the shock absorber.
HINT:
Fit the lower end of the coil spring into the gap of the spring low-
er seat.
R00912
4. INSTALL SUSPENSION SUPPORT
(a) Install the suspension support to the piston rod and tem-
porarily tighten a new nut.
(b) Rotate the suspension support and set it in the direction
Outside
shown in the illustration.
(c) Remove the SST.
SST
HINT:
After removing SST, again check the direction of the suspen-
R00823
sion support.
– REAR SHOCK ABSORBER
09727–30021
09727–30021
Author :
SA–61
SA08E–01
Date :
2012