Toyota Camry Manual page 2902

SA–70
SUSPENSION AND AXLE –
REMOVAL
1. REMOVE REAR WHEELS
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. REMOVE LEFT AND RIGHT STABILIZER BAR LINKS
Remove the 4 nuts and 2 links.
HINT:
If the ball joint turns together with the nut, use a 5 mm hexagon
wrench to hold the stud.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
3. REMOVE HEAT INSULATOR
Remove the 3 bolts, clip and heat insulator.
W03225
4. REMOVE LEFT AND RIGHT BRACKETS AND BUSH-
INGS
Remove the 4 bolts, 2 brackets and bushings.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, install the bushing to the portion out-
side the bushing on the stabilizer bar.
5. REMOVE STABILIZER BAR
W03226
REAR STABILIZER BAR
Author :
SA08M–01
Date :
2021