Toyota Camry Manual page 2885

SUSPENSION AND AXLE
(c)
(d)
6.
7.
A
(a)
A
B
HINT:
At the time of installation, please refer to the following items.
W03211
(b)
NOTICE:
When removing/installing bolt, stop the nut from rotating
and loosen/torque the bolt.
(c)
(d)
R11165
(e)
– REAR AXLE HUB
w/ Drum brake:
Remove the bolt, and disconnect the flexible hose from
the shock absorber.
Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)
Support the backing plate securely.
w/ ABS:
REMOVE ABS SPEED SENSOR
Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
REMOVE REAR AXLE CARRIER
Loosen the 3 nuts.
Torque:
Nut A:
Reused nut: 196 N·m (2,000 kgf·cm, 145 ft·lbf)
New nut: 255 N·m (2,600 kgf·cm, 188 ft·lbf)
Nut B: 181 N·m (1,850 kgf·cm, 134 ft·lbf)
z
If reusing the 2 nuts, coat the nut's threads with en-
gine oil.
z
After stabilizing the suspension, torque the nuts.
Remove the bolt and nut, and disconnect the strut rod
from the rear axle carrier.
Torque: 113 N·m (1,150 kgf·cm, 83 ft·lbf)
Remove the 2 nuts and bolts on the lower side of the
shock absorber.
Remove the nut, bolt and No.2 lower suspension arm.
Remove the rear axle carrier.
Author :
SA–53
Date :
2004