SUPPLEMENTAL RESTRAINT SYSTEM
Cross Section
H01608
H08274
–
SIDE AIRBAG ASSEMBLY (TMC Made)
INSPECTION
1.
VEHICLE NOT INVOLVED IN COLLISION
(a)
Do a diagnostic system check. (See page DI–626)
(b)
Do a visual check which includes the following items with
the seatback assembly installed in the vehicle.
Check that there are no cuts or frayed seams and outside
of seatback cover.
2.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS
NOT DEPLOYED
(a)
Do a diagnostic system check. (See page DI–626)
(b)
Do a visual check which includes the following items with
the seatback assembly removed from the vehicle.
F
Check cuts and cracks of the side airbag assembly.
F
Check cuts and cracks in wire harnesses, and chip-
ping in connectors.
CAUTION:
For removal and installation of the seatback assembly, see
page
RS–40
and RS–49. Be sure to follow the correct pro-
cedure.
3.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS
DEPLOYED
(a)
Do a diagnostic system check.
(See page DI–626)
(b)
Do a visual check which includes the following items with
the seatback assembly removed from the vehicle.
F
Check the seatback installation part of the seat ad-
juster.
F
Check the damage to the connector and wire har-
ness.
HINT:
If the seat adjuster is deformed, never repair it. Always replace
it with a new one.
Author :
RS–41
RS05I–02
Date :
2186