Toyota Camry Manual page 2844

SA–12
SUSPENSION AND AXLE
SST
R08859
SST
R00789
SST
W02110
SST
SST
R11486
– FRONT AXLE HUB
DISASSEMBLY
1. REMOVE DUST DEFLECTOR
Using a screwdriver, remove the dust deflector.
2. REMOVE LOWER BALL JOINT
(a) Remove the cotter pin and nut.
(b) Using SST, remove the lower ball joint.
SST 09628–62011
3. REMOVE AXLE HUB
(a) Using SST, remove the axle hub.
SST 09520–00031
(b) Using SST and a press, remove the inner race (outside)
from the axle hub.
SST 09950–00020, 09950–60010 (09951–00400),
09950–70010 (09951–07100)
4. REMOVE DUST COVER
Using a torx wrench (T30), remove the 4 bolts and dust cover.
5. REMOVE BEARING FROM STEERING KNUCKLE
(a) Using snap ring pliers, remove the snap ring.
(b) Place the inner race on the outside of the bearing.
(c) Using SST and a press, remove the bearing.
SST 09310–35010, 09527–17011
Author :
SA07D–01
Date :
1963