SA–48
SUSPENSION AND AXLE
–
REMOVAL
1.
REMOVE LEFT AND RIGHT FRONT WHEELS
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2.
REMOVE LEFT AND RIGHT STABILIZER BAR LINKS
Remove the 4 nuts and 2 links.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
HINT:
If the ball joint turns together with the nut, use a 5 mm hexagon
wrench to hold the stud.
W03208
3.
REMOVE LEFT AND RIGHT BRACKETS AND BUSH-
INGS
Remove the 4 bolts, 2 brackets and bushings.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, please refer to the following item.
Install the bushing to the inside of the bushing on the stabilizer
bar.
4.
REMOVE STABILIZER BAR
W03209
Remove the stabilizer bar from the left hand side.
NOTICE:
Be careful not to damage the pressure feed tube.
FRONT STABILIZER BAR
Author :
SA082–01
Date :
1999